|
Please print this page as a
reference to help you when you are making your project.
To order an item,
simply enter the item number in our search engine box which is the white
box following the words Search by keyword, brand or item number and
contains the phrase Enter Keyword or Item#. You should be able
to see this in the blue box in the upper left corner of each web page.
If you do not see that box, simply click on
this link
to enter this site from our main home page.
|
Materials:
- PE-4034, Shapelets, Classic Designs
- 50065P, Copper Embossing Metal
- 1960-41, Stretchy Cord 5mm Black
- 1961-07, Natural Asst Glass Beads, Small
- 1880-44, Earring Pad 10mm flat butterfly gold x 30 set
- E6000, Industrial Strength Adhesive/Sealant
- 70689M, Needle Tool
- 1199-10, Embossing Gun
- Scissors, Hammer/Mallet, Acrylic Rolling Tool
Directions:
- Cut copper embossing metal to shape x 2 using shapelets template. We
used the triangular shape.
- Make three holes in metal, tapering up from bottom corner of metal.
Holes should be 1/4" apart (approx 1/8" from edge). Refer
to picture for each earring right/left.
- To create different colors in the metal, heat with heating tool on a
cookie sheet. Keep in one spot for approx 5 minutes.
CAUTION: THIS GETS VERY HOT!
To texture metal shape, use hammer/mallet. Pound metal at different
angles. Use roller to flatten metal back to shape, leaving texture.
String asst glass beads on stretchy cord. Give enough room for tying
off cording. Triple knot each end and cut off excess cord to secure
beads. Beads should hand 2-1/2" from hole at bottom corner. Next
hole up, beads should hang 2-1/4" down, and 2" from top hole.
Cut a 4" piece of stretchy cord. Select 4 small beads. String
beads to middle of cord. Put a 1/4" drop of multi-purpose
cement to center of metal shape. Lay beads in glue. Bend cording in
different directions, gluing down at each curve and ends.
Glue earring back to center of top corner of metal shape back.
COMPLIMENTS OF SUNSHINE
DISCOUNT CRAFTS
|
